Directions: To thoroughly clean and disinfect your lenses you must complete each of the following steps every time you remove them. STEP 1: Place at least three drops of ReNu Multi-Purpose Solution on each side of the contact lens and rub for 20 seconds. No separate daily cleaner needed. STEP 2: Remove surface debris by rinsing thoroughly with ReNu Multi-Purpose Solution. STEP 3: Place cleaned contact lenses in lens case and fill with fresh ReNu Multi-Purpose Solution. SOAK FOR AT LEAST FOUR HOURS. Store your lenses in the unopened lens case until ready to wear, up to a maximum of 30 days. See inside of carton for complete cleaning, disinfection and protein removal directions. TO REMOVE PROTEIN FROM YOUR CONTACTS: ReNu Multi-Purpose Solution may be used to dissolve Bausch & Lomb ReNu 1 Step or ReNu Effervescent Enzymatic Cleaner Tablets. The special combination of ReNu Multi-Purpose Solution and ReNu 1 Step Enzymatic Cleaning tablets provides simultaneous lens disinfection and protein removal. If ReNu Effervescent Enzymatic Cleaner is used, you must disinfect your lenses as a separate step. Follow directions provided with the enzymatic cleaner and use as directed by your eye care professional.

Warnings: SEE INSIDE OF CARTON FOR COMPLETE INSTRUCTIONS AND IMPORTANT SAFETY INFORMATION. NOT FOR USE WITH HEAT DISINFECTION. IF YOU ARE ALLERGIC TO ANY INGREDIENT IN THIS PRODUCT, DO NOT USE. Never re-use this solution. Keep the bottle tightly closed when not in use. Store solution at room temperature. Use before expiration date marked on the carton and bottle. Make sure this product is kept well out of the reach of children.

Active Ingredients: Poloxamine; DYMED (Polyaminopropyl Biguanide) 0.00005%; Boric Acid; Edetate Disodium; Sodium Borate; Sodium Chloride